In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can ensure that nothing will leak once you place the mask on. Make sure that the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s dog face mask head. As soon as you’ve made sure that it is secure, then you can start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the base of the mask and then fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are flat and be sure that it’s not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you’ll need to do some sanding to be certain it is safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.